CONCRETE JOINT SYSTEMS PRODUCTS
SRG GLOBAL
Few specialist services companies have amassed the same knowledge, developed as many innovations or worked on as many world-class projects as SRG have. As a result, SRG have an excellent range of reinforcing innovations that increase onsite efficiency and safety.
SURELOK
The SureLok solution engineers a pressure sealed system bridging the joint whilst allowing two-way horizontal movement. When required, SureLok permanently locks the joint together.
QUIKBOX
QuikBox, a reinforcement continuity strip product, more commonly known in the construction sector as ‘pull out boxes’. Australian made, prefabricated, fully sealed system for reinforcing continuity at construction joints.
SHEAR STUD RAIL
SRG shear stud rails are installed with-in a flat slab to strengthen the reinforcement around a column and solve the issue of punching shear through engineered design.
BARTEK PTM REBAR SPLICE SYSTEM
The Bartek PTM Rebar Splice System is a parallel threaded mechanical splicing system for the connection of reinforcing bars from 12 to 40mm.
QUIKANKOR
The QuikAnkor system is a cast in-situ threaded insert anchor solution that is commonly used to connect slabs and beams to walls and cores. The system uses Grade 500N ReidBar in a range of diameters.
SRG GLOBAL
Few specialist services companies have amassed the same knowledge, developed as many innovations or worked on as many world-class projects as SRG have. As a result, SRG have an excellent range of reinforcing innovations that increase onsite efficiency and safety.
SURELOK
The SureLok solution engineers a pressure sealed system bridging the joint whilst allowing two-way horizontal movement. When required, SureLok permanently locks the joint together.
QUIKBOX
QuikBox, a reinforcement continuity strip product, more commonly known in the construction sector as ‘pull out boxes’. Australian made, prefabricated, fully sealed system for reinforcing continuity at construction joints.
SHEAR STUD RAIL
SRG shear stud rails are installed with-in a flat slab to strengthen the reinforcement around a column and solve the issue of punching shear through engineered design.
BARTEK PTM REBAR SPLICE SYSTEM
The Bartek PTM Rebar Splice System is a parallel threaded mechanical splicing system for the connection of reinforcing bars from 12 to 40mm.
QUIKANKOR
The QuikAnkor system is a cast in-situ threaded insert anchor solution that is commonly used to connect slabs and beams to walls and cores. The system uses Grade 500N ReidBar in a range of diameters.
ANCON
Ancon designs and manufactures high integrity steel products for the construction industry, supplying customers worldwide in a variety of sectors from small-scale residential developments to major infrastructure projects.
SHEAR LOAD CONNECTORS
Ancon Shear Load Connectors offer significant advantages over conventional single dowels. These connectors are more effective at transferring load, simpler to install and ensure the necessary alignment.
LOCKABLE DOWELS
Lockable dowels allow for initial shrinkage of the concrete to take place and are then locked in position, by mechanical and chemical means, to prevent further movement taking place.
SHEARFIX STUD RAILS
Ancon Shearfix Punching Shear Reinforcement is used within a slab to provide additional reinforcement around the columns. It is an ideal solution to the design and construction problems associated with punching shear.
BAR COUPLERS
Lapped joints are not always an appropriate means of connecting rebar. The use of bar couplers can simplify the design and construction of reinforced concrete and reduce the amount of reinforcement required.
ANCON
Ancon designs and manufactures high integrity steel products for the construction industry, supplying customers worldwide in a variety of sectors from small-scale residential developments to major infrastructure projects.
SHEAR LOAD CONNECTORS
Ancon Shear Load Connectors offer significant advantages over conventional single dowels. These connectors are more effective at transferring load, simpler to install and ensure the necessary alignment.
LOCKABLE DOWELS
Lockable dowels allow for initial shrinkage of the concrete to take place and are then locked in position, by mechanical and chemical means, to prevent further movement taking place.
SHEARFIX STUD RAILS
Ancon Shearfix Punching Shear Reinforcement is used within a slab to provide additional reinforcement around the columns. It is an ideal solution to the design and construction problems associated with punching shear.
BAR COUPLERS
Lapped joints are not always an appropriate means of connecting rebar. The use of bar couplers can simplify the design and construction of reinforced concrete and reduce the amount of reinforcement required.
MAX FRANK
Max Frank Australia Pty is part of the FRANK international group of companies with a presence in over 30 countries worldwide. In Australia & New Zealand, FRANK offers the full range of our innovative technologies for the construction industry.
EGCODORN SHEAR FORCE DOWELS
The Egcodorn shear force dowel transmits maximum forces with minimum component thicknesses and is used with primarily static loads. Max Frank use high-quality materials and a unique corrosion protection system.
STREMAFORM
Stremaform divides large structural components into concrete pours. Stremaform in the concrete gives a rough surface with no scabbling, the reinforcement can be continued without a break.
MAX FRANK
Max Frank Australia Pty is part of the FRANK international group of companies with a presence in over 30 countries worldwide. In Australia & New Zealand, FRANK offers the full range of our innovative technologies for the construction industry.
EGCODORN SHEAR FORCE DOWELS
The Egcodorn shear force dowel transmits maximum forces with minimum component thicknesses and is used with primarily static loads. Max Frank use high-quality materials and a unique corrosion protection system.
STREMAFORM
Stremaform divides large structural components into concrete pours. Stremaform in the concrete gives a rough surface with no scabbling, the reinforcement can be continued without a break.
CONNOLLY
Connolly Key Joint began producing preformed metal key joint in 1990 and has since grown to become the largest supplier of metal key joint to the Australian market.
EXPANSION JOINT
The Connolly Expansion Joint is a continuous pour solution for expansion joints in slab on ground applications.
KEY JOINT
Connolly Key Joints are a continuous pour solution for contraction joints in slab on ground applications.
DOWEL CRADLE
Dowel cradles are used for load transfer in saw cut contraction joints. They are a welded wire assembly that ensures the horizontal and vertical alignment of dowels at the correct spacing and height.
CONNOLLY
Connolly Key Joint began producing preformed metal key joint in 1990 and has since grown to become the largest supplier of metal key joint to the Australian market.
EXPANSION JOINT
The Connolly Expansion Joint is a continuous pour solution for expansion joints in slab on ground applications.
KEY JOINT
Connolly Key Joints are a continuous pour solution for contraction joints in slab on ground applications.
DOWEL CRADLE
Dowel cradles are used for load transfer in saw cut contraction joints. They are a welded wire assembly that ensures the horizontal and vertical alignment of dowels at the correct spacing and height.
PEIKKO
Peikko supplies a large selection of concrete connections and composite structures. Peikko products can be used both in precast and cast-in-situ solutions in wide variety of applications. Customers worldwide are served through Peikko offices in more than 30 countries.
DOWELCRADLE Load Transfer System
A prefabricated leave-in-place load transfer system dedicated to the construction of sawn or induced contraction joints. Available with plate and round bar dowels to meet the requirements of every application.
Brochure Order Enquiry
PEIKKO
Peikko supplies a large selection of concrete connections and composite structures. Peikko products can be used both in precast and cast-in-situ solutions in wide variety of applications. Customers worldwide are served through Peikko offices in more than 30 countries.
DOWELCRADLE Load Transfer System
A prefabricated leave-in-place load transfer system dedicated to the construction of sawn or induced contraction joints. Available with plate and round bar dowels to meet the requirements of every application.
Brochure Order Enquiry